138
When POWER SAVE is on, response from the AR8200 may be sluggish and there will be periods of
no receive.
If the key is being used to display a frequency with FREQUENCY OFFSET in use, this offset
frequency cannot be stored into memory.
The squelch may not operate promptly (as you may expect) when monitoring in USB, LSB, CW and
NAM modes due the narrow bandwidths employed. This is a fundamental characteristic of the squelch
circuit. Audio may remain even though the “S” squelch legend may have disappeared for a couple of
seconds. It is suggested that LEVEL squelch be used as an alternative in this situation.
There are no internal operator adjustments. In the unlikely event of servicing being required,
please contact your dealer for technical assistance.
(20) Optional accessories
Slot cards:
Five slot cards are available, only one may be fitted at a time.
1. VI8200 Voice inverter (analogue) in 157 steps.
2. CT8200 CTCSS squelch & search.
3. TE8200 Tone eliminator in 256 steps.
4. RU8200 Chip based recording and playback, 20 seconds approx.
5. EM8200 External extended memory, backup 4,000 memories, 160 search banks
(can hold as much data as 4 x AR8200).
Leads:
Three leads are available for use with the option socket.
1. CR8200 tape recording lead.
2. CO8200 data clone lead.
3. CC8200 computer control lead with level shift
(available with imperial (PC98) & metric (DOSV) screws) and supplied
with RS232 protocol listing in PDF format.
Aerials:
There are many suitable aerials available on the market, these include.
Section 20
To Next Page
Loading...
