Apache Labs ANDROMEDA ANAN-7000DLE MKII - 7.3.1 Encoder Tab Configuration

ANDROMEDAManual Page35of56
Thisfor misinvolvedfromtheEditcontrolsbuttonontheMenu>Setup>CATcontrol>
ANDROMEDApage.Ithasfourdisplaytables:oneforeachofEncoders,Pushbuttons,Indicators&
Menus.Upto5commandbuttonsmaybevisible:
ResetData Reset all configuration data to default settings.
 This may be useful if the
settingshavebeenverybadlymessedupbyaccident.
Save Savethechangesma de.ThissavestheANDROMEDAsettingsfile.
Close Closetheeditorform
InsertMenu Insert a menu with 8 menu commands at the selected location. (If the
selection arrow istowardthe endof a menu, itwillinsertafter thecurrent
menu.Iftowardthestart,itinsertsbeforethecurrentmenu).
ThisisonlyvisiblewhentheMenutabisselected.

DeleteMenu Deletethemenu(with8menucommands)atthecurrentlysele ctedlocation.
ThisisonlyvisiblewhentheMenutabisselected.

7.3.1 EncoderTab

Thisfor meditssettingsassignedtorotaryencodercontrols.Ifyo uha ve“dualshaft”encoderswith
twocontrols,theuppermostcontrolwillbethefirstcontrol(egencoder1)andthelowerknobwill
thenextone(egencoder2).TheVFOencodercannotbereconfiguredusingthisform.