Apache Labs ANDROMEDA ANAN-7000DLE MKII - 10.7.2 Assign Static IP Address using HPSDRBootloader; 10.7.3 HPSDRProgrammer for Protocol 2

ANDROMEDAManual Page53of56
Ifyoureceivethiserrormessage,renametherbffileaddingthewordmetistothefilename.Inmy
exampleIaddedittotheend.
10.7.2 AssignStaticIPAddressusingHPSDRBootloader
1. ChoosethecorrectComputerInterfaceandthenTestforBootloader.
2. ClickonIPfromthemenu.
3. ClickonReadIPtoreadthecurrentIPaddressoftheradio.
4. EnterthenewIPaddressintheIPAddressfields.
5. ClickonWriteIPtoupdatetheIP
addressintheradio.
TorevertbacktousingDHCPorAPIPAenter0.0.0.0intheIPAddressfieldsandclickonWriteIP. 
10.7.3 HPSDRProgrammerforProtocol2
ItisalsopossibletousetheHPSDRProgrammerutility toreprogramtheflashmemory.
Theupdatefilesareavailablefromhttps://github.com/TAPR/OpenHPSDR‐Firmware.Operationwith
THETISwillrequireProtocol2firmware.FirmwareUpdatefileswillhavethe“.rbf”suffix.The
HPSDRProgrammerutilityisspecificallydesignedsoyoucannotinadvertentlyoverwriteordamage
thelowerbootloaderaddresses
1. DownloadtheHPSDRProgrammerforWindows:https://github.com/TAPR/OpenHPSDR‐
Protocol2‐Programmers/releases
2. ExitfromtheTHETISprogram,ifitwasopen.
3. Unzipthefolder.Thereisnoformalinstaller.
3. OpenaWindows comman d prompt("DOS")window.