Apache Labs ANDROMEDA ANAN-7000DLE MKII - 7.3.3 Indicator Tab Configuration

ANDROMEDAManual Page38of56
Buttonnumber Displaysallthepossiblepushbuttonnumbers(1‐50).
Toselectsettingsforaparticularpushbutton,either:
 Usethemousetoclickinthenumberforthatpushbutton,or
 Pressthepushbuttonon thefrontpaneltoselecttherow. 
Pushbuttonaction Displaystheactionthathasbeenassignedtothispushbutton.
Tochangethecontrolaction:clickinthecell,twice.Acomboboxcontrolwill
appear.Clickitsdownarrowtoshowalistoftheoptionsthatcanbeassigned.
Clickanoptiontoselectit.
SelectedRX This setting allows the control to be assigned to a specific receiver. This
controlisalsoacomboboxandisusedinthesameway.
 Some controls are not  associated with a receiver (eg “Clear RIT”) and
“defaultsetting”shouldbeselected
 Receiver controls can be
 assigned to RX1 only, RX2 only, or “default
setting”.For thelatterThetiswillchooseRX1ifVFOAisselected,orRX2
ifVFOBisselected.

7.3.3 IndicatorTab
