Apilus xCell - Page 29

To Next Page

To Previous Page

MultiBlend

Transit time and intensity setting of galvanic cur-

rent, the intensity of thermolytic heating (the com-

puter automatically calculates the intensity of

heating according to the chosen settings for galva-

nic current - actual value is displayed); transit time

and impulse intensity for thermolysis at end of the

treatment.

SynchroBlend

Transit time and intensity setting of galvanic current;

intensity settings of the pico-impulses of thermoly-

sis, time/delay factor (2/1) (duration of every pico-

impulse and the thermal relaxation time between

each pico-impulse in milliseconds.)

Cata +

Intensity of galvanic current (adjust according to

the client’s tolerance).

1.06 mA

Ana -

Intensity of galvanic current (adjust according to

the client’s tolerance).

1.06 mA

7 s

5 %

0.45 mA

0.024 s 52 %

8 s

0.45 mA

6 % 2/1