44
© 2014 Dectro International. All rights reserved.
Guide to avoid or to eliminate electromagnetic
interference with other equipment
The most effective way to prevent your Apilus xCell
device from interfering with the operation of other
equipment is to move it as far away as possible
from those devices.
In the event that a disruption to the normal opera-
tion of the equipment is discovered, it is possible to
determine which of the devices is responsible for
the interference by turning them off one at a time.
Possible corrective actions include:
• Relocate the disruptive device as far away as
possible from the affected device.
• Check the condition of the cables that are
connected to both the interfering device and the
affected unit.
• Move the cables connected to both the interfe-
ring device and those of the affected unit.
• Ensure that the equipment is properly grounded.
• Connect the interfering device and the affected
device on different AC power distribution circuits.
• Install filters between the AC circuit outlet and the
power supply for each device.
• Replace the cables from both the interfering device
and affected device with shielded cables.
Apilus xCell precautions
• Do not place this device in a dusty location.
• Never replace the fuses with others that have a
different amperage.
• Take care not to damage the power cord to avoid
any risks of fire or electric shock.
• Avoid exposing the device to a heat source, such
as the sun.
• When maintaining the unit, use a soft cloth with
mild detergents. Avoid any volatile solvents, such
as wax cleaners, as they could damage the finish.
• Do not place the device in a humid area. It should
be kept away from water or other liquids that
could damage it.
• Do not add equipment which is not supplied by
the manufacturer, and do not perform any modi-
fications whatsoever. Do not attempt to disas-
semble unit. Refer all repairs to a service center
authorized by Dectro International which only use
compliant components to perform repairs.
• This device and its accessories should be kept
out of the reach of children or unqualified indivi-
duals.
• Never use any defective accessories with this
device. If the Apilus xCell needs to be transpor-
ted or shipped, always use its original packaging.
Disposal of Materials
The Apilus xCell is an electronic device. It contains
metals such as aluminum, gold, copper, tin. This
product should be collected through a separate
collection service at the end of its lifecycle. In the
concerned territory, Dectro International is commit-
ted to recovering the equipment it has manufactu-
red at the end of its lifecycle. Fees may apply.
Probes used to perform treatments must be placed
in containers specially design for biomedical
waste. These containers must be kept out of reach
of children to prevent any risk of accident. They
must then be collected through a separate collec-
tion service. If not properly recovered, biomedical
waste can contribute to the spread of infectious
diseases, as well as to the contamination of soil,
water and air.
To Next Page
Loading...