Apogee Ensemble Thunderbolt - Multiple Units

12
Apogee Ensemble Thunderbolt | User’s Guide
Multiple Units:
Two Ensemble Thunderbolts or an Ensemble Thunderbolt and an Element Series interface can be connected to
the same system�
1� Using a Thunderbolt cable, connect from a Mac with Thunderbolt 1, Thunderbolt 2, or Thunderbolt 3 port > to
either of Ensemble’s Thunderbolt ports�
2� Using a second Thunderbolt cable, connect from the remaining Thunderbolt port > to the Element Series
interface, or second Ensemble�
3� Using ADAT Optical (Toslink) cables, connect OUT of the rst unit > to the IN of the second unit. Do the same
in the opposite direction until all available optical connections are used�
• Four optical cables will be required if the second unit is another Ensemble Thunderbolt or Element 88.
• Two optical cables will be required if the second unit is an Element 46 or Element 24.