Apogee Ensemble Thunderbolt - Select Ensemble in your DAW; Logic Pro X Setup; Pro Tools Setup

21
Apogee Ensemble Thunderbolt | User’s Guide
Select Ensemble in your DAW
Most professional applications have their own audio preferences that are separate from the Mac System
Preferences� Basic steps for setting up Ensemble are provided� For more detail on this topic, refer to the
documentation that comes with your recording program�
Select Ensemble in Logic Pro X
1� Go to Logic Pro X > Preferences > Audio�
2� In the Devices Tab, select “Ensemble” in the
Output and Input Device drop-down boxes�
“Apogee Thunderbolt” when in Multi-Unit Mode
3� Start by setting the I/O Buer Size to “64
Samples”� This setting may need to be adjusted
based on your computer’s performance�
4� Select “Apply Changes” and close the
Preferences window�
Select Ensemble in Pro Tools
1� Go to Setup > Playback Engine�
2� In the Playback Engine drop-down box, select
“Ensemble”�
“Apogee Thunderbolt” when in Multi-Unit Mode
3� Start by setting the H/W Buer Size to “64
Samples”� This setting may need to be adjusted
based on your computer’s performance�
4� Select OK�