18
Apogee Ensemble Thunderbolt | User’s Guide
Adjust Output Volume
1� Turn Output Controller, Headphone 1, or Headphone 2 knob to adjust the respective output level�
2� Press the Output Controller, Headphone 1, or Headphone 2 knob to toggle mute on/o.
Assignable Buttons
Assignable buttons A, B, C, & D can be programmed to perform dierent functions. Press an Assignable button
to perform it’s programmed function�
• Programming of the Assignable Buttons can only be done in the Apogee Control software’s Front Panel &
Remote Control Assignments window. See page 51 and page 53 for more detailed information.
The factory default settings are:
A - Talkback - must hold button down
B - Clear Meters
C - Toggle G1/G2 output source between “Thru” and “From Software”
D - Toggle Mute function between Monitor Out and Headphones outputs
To Next Page
Loading...
