Apogee Ensemble Thunderbolt - Monitoring the Input Signal; DAW Monitoring Setup; Enable Input Monitor (Logic, Pro Tools, Ableton)

23
Apogee Ensemble Thunderbolt | User’s Guide
Monitoring the Input Signal
Using your DAW to Monitor
By default, Ensemble is congured for your recording software or DAW to perform the monitoring duty of
passing your input signal on to your output. For instructions on conguring some of the major DAW programs
with Ensemble, see page 21�
Enable Input Monitor in Logic Pro X
1� Open Logic Pro X > Preferences > Audio�
2� Make sure the box next to “Software Monitoring”
is checked�
3� Select the “i” button in each track you’d like to
input monitor�
Enable Input Monitor In Pro Tools
• Click the “i” button to enable Input Monitoring
Enable Input Monitor in Ableton
Live
• In the track I/O section, set the Monitor switch
to “Auto”, or “In”