Apogee Ensemble Thunderbolt - Front Panel Controls; Adjust Input Gain; Access Input Settings

17
Apogee Ensemble Thunderbolt | User’s Guide
Front Panel Controls
Many Ensemble settings can be controlled from the front panel� For full control over all settings, use the Apogee
Control Software (page 40)�
Adjust the Input Gain
1� Turn the Input Controller knob to adjust the input gain for the selected channel�
2� Select a dierent channel by pressing the Input Controller knob repeatedly until the
desired input is highlighted�
3� Alternatively, press one of the Input Select buttons to jump directly to that input�
Accessing other Input Settings:
1� Once an Input Select button is illuminated, press it again to
access the Input Settings screen�
2� Turn the Input Controller knob to navigate up and down and highlight the dierent
parameters�
3� Press the Input Controller knob to change a parameter to a dierent setting.
4� To exit the Input Settings screen, press the illuminated Input Select button� Otherwise,
Ensemble will automatically exit after idling for 15 seconds�
For more information on the parameters of the Input Settings screen, see page 9.