Safety and EMC Compliance Information
xvi GeneAmp PCR System 9700 Dual 96 Sample Block Module User Guide
Safety and Electromagnetic Compatibility (EMC)
Standards
This section provides information on:
• U.S. and Canadian Safety Standards
• Canadian EMC Standard
• European Safety and EMC Standards
• Australian EMC Standards
U.S. and
Canadian Safety
Standards
This instrument has been tested to and complies with standard UL 3101-1, “Safety
Requirements for Electrical Equipment for Laboratory Use, Part 1: General
Requirements.”
This instrument has been tested to and complies with standard CSA 1010.1, “Safety
Requirements for Electrical Equipment for Measurement, Control, and Laboratory
Use, Part 1: General Requirements.”
Canadian EMC
Standard
This instrument has been tested to and complies with ICES-001, Issue 3: Industrial,
Scientific, and Medical Radio Frequency Generators.
European Safety
and EMC
Standards
Safety
This instrument meets European requirements for safety (Low Voltage Directive
73/23/EEC). This instrument has been tested to and complies with standards
EN 61010-1:2001, “Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use, Part 1: General Requirements” and EN 61010-2-010,
“Particular Requirements for Laboratory Equipment for the Heating of Materials.”
EMC
This instrument meets European requirements for emission and immunity (EMC
Directive 89/336/EEC). This instrument has been tested to and complies with
standard EN 61326 (Group 1, Class B), “Electrical Equipment for Measurement,
Control and Laboratory Use – EMC Requirements.”
Australian EMC
Standards
This instrument has been tested to and complies with standard AS/NZS 2064,
“Limits and Methods Measurement of Electromagnetic Disturbance Characteristics
of Industrial, Scientific, and Medical (ISM) Radio-frequency Equipment.”
To Next Page
Loading...
Need help?
General
