What to do if Applied Biosystems Control Unit shows 'Method requires at least one segment'?
To fix this, review and correct the method to include the temperature parameter(s) on Applied Biosystems Control Unit.
What to do if Applied Biosystems Control Unit displays message 'Valid range is'?
To solve this problem with Applied Biosystems Control Unit, reenter a value within the parameters of the field.
How to fix 'Tm temperature out of range' error on Applied Biosystems GeneAmp PCR System 9700?
To fix the 'Tm temperature out of range' error on your Applied Biosystems Laboratory Equipment, check the input value and retry.
Why does my Applied Biosystems GeneAmp PCR System 9700 printer fail?
If your Applied Biosystems Laboratory Equipment printer fails, verify the printer settings (baud rate = 9600, no parity, one stop bit, eight data bits) and ensure you are using the correct Applied Biosystems printer cable.
Why is my Applied Biosystems GeneAmp PCR System 9700 making too much noise?
If the Applied Biosystems Laboratory Equipment is making too much noise, check for any obstructions in the side vents.
What to do if Applied Biosystems Laboratory Equipment says 'Not enough method memory left'?
To resolve the 'Not enough method memory left' error on your Applied Biosystems Laboratory Equipment: ? Determine the available storage memory on the instrument or PC card. ? Delete or store rarely used methods elsewhere.
How to fix 'User name already defined' on Applied Biosystems Laboratory Equipment?
To address a 'User name already defined' error on the Applied Biosystems Laboratory Equipment, ensure that you do not duplicate user names.
What to do if Applied Biosystems Laboratory Equipment displays 'Field is full'?
To resolve the 'Field is full' error on your Applied Biosystems Laboratory Equipment, reenter the data ensuring it conforms to the field's specifications.
How to fix 'Valid range is' error on Applied Biosystems Laboratory Equipment?
To resolve the 'Valid range is' error on your Applied Biosystems Laboratory Equipment, reenter a value within the specified parameters of the field.
What to do if Applied Biosystems GeneAmp PCR System 9700 Laboratory Equipment displays 'Enter user and method names or CANCEL'?
To resolve the 'Enter user and method names or CANCEL' error on your Applied Biosystems Laboratory Equipment, specify the method name and choose a user to store the method.
General| Temperature Range | 4°C to 99.9°C |
|---|---|
| Temperature Accuracy | ±0.25°C |
| Temperature Uniformity | ±0.5°C |
| Block Format | 96-well |
| Temperature Uniformity at 60°C | ±0.5°C |
| Display | LCD |
| Power Requirements | 100-240V, 50/60Hz |
| Sample Capacity | 96 samples |
| Sample Volume Range | 10-100 µL |
Procedures for powering on, configuring settings, and customizing instrument parameters.
Guide to choosing, viewing, searching, and sorting PCR methods.
Steps to start, monitor, and pause a PCR run using the instrument.
Procedures for stopping, aborting, reviewing history, and handling run completion.
Guide to creating new methods and modifying cycling parameters like holds, cycles, and pauses.
Steps for naming, storing, printing, editing, and deleting created methods.
Step-by-step instructions for safely replacing the instrument's external fuses.
A table of error messages, their causes, and recommended actions.
A table listing common problems, their causes, and suggested remedies.
To Next Page
