How to fix 'Enter a name or CANCEL' error on Applied Biosystems Laboratory Equipment?
To resolve the 'Enter a name or CANCEL' error on your Applied Biosystems Laboratory Equipment, enter the user name to which the desired method is assigned.
Why Applied Biosystems GeneAmp PCR System 9700 cooling fan does not make whirring sound?
To fix the issue where the Applied Biosystems Laboratory Equipment instrument cooling fan does not make a whirring sound, verify that the power switch is on, the power cord is connected, and check the fuses.
What to do if Applied Biosystems GeneAmp PCR System 9700 Laboratory Equipment says 'Delete your methods first'?
To resolve the 'Delete your methods first' message on your Applied Biosystems Laboratory Equipment, delete or transfer the associated methods before deleting a user name.
What to do if Applied Biosystems GeneAmp PCR System 9700 Laboratory Equipment has no screen display and no response when turned on?
To fix the Applied Biosystems Laboratory Equipment when it says, 'No screen display No response when you turn the instrument on', verify that the power switch is turned on, the power cord is properly connected, and check the fuses.
What to do if Applied Biosystems GeneAmp PCR System 9700 Laboratory Equipment displays 'Invalid password/pin#'?
To resolve the 'Invalid password/pin#' error on your Applied Biosystems Laboratory Equipment, enter the correct PIN#.
How to fix 'Infinity hold not allowed in cycle' error on Applied Biosystems GeneAmp PCR System 9700?
To fix the 'Infinity hold not allowed in cycle' error on your Applied Biosystems Laboratory Equipment, use finite values for cycle segments within the method.
What to do if Applied Biosystems Laboratory Equipment displays 'Maximum of 6 segments allowed'?
To resolve the 'Maximum of 6 segments allowed' error on your Applied Biosystems Laboratory Equipment, do not assign more than six hold or cycle parameters to a method.
How to fix 'Can only enter an infinity hold at end' error on Applied Biosystems Laboratory Equipment?
To resolve the 'Can only enter an infinity hold at end' error on your Applied Biosystems Laboratory Equipment, assign finite time segments to holds within a method.
What to do if Applied Biosystems Laboratory Equipment displays 'Remove infinity hold first'?
To resolve the 'Remove infinity hold first' error on your Applied Biosystems Laboratory Equipment, add segments prior to the post-PCR infinity hold.
What to do if Applied Biosystems GeneAmp PCR System 9700 displays 'Method requires at least one segment'?
To resolve the 'Method requires at least one segment' error on your Applied Biosystems Laboratory Equipment, review and correct the method to include the temperature parameter(s).
General| Temperature Range | 4°C to 99.9°C |
|---|---|
| Temperature Accuracy | ±0.25°C |
| Temperature Uniformity | ±0.5°C |
| Block Format | 96-well |
| Temperature Uniformity at 60°C | ±0.5°C |
| Display | LCD |
| Power Requirements | 100-240V, 50/60Hz |
| Sample Capacity | 96 samples |
| Sample Volume Range | 10-100 µL |
Procedures for powering on, configuring settings, and customizing instrument parameters.
Guide to choosing, viewing, searching, and sorting PCR methods.
Steps to start, monitor, and pause a PCR run using the instrument.
Procedures for stopping, aborting, reviewing history, and handling run completion.
Guide to creating new methods and modifying cycling parameters like holds, cycles, and pauses.
Steps for naming, storing, printing, editing, and deleting created methods.
Step-by-step instructions for safely replacing the instrument's external fuses.
A table of error messages, their causes, and recommended actions.
A table listing common problems, their causes, and suggested remedies.
To Next Page
