How to fix 'No seconds in time field' error on Applied Biosystems GeneAmp PCR System 9700?
To resolve the 'No seconds in time field' error on your Applied Biosystems Laboratory Equipment, include seconds when entering the time.
What to do if Applied Biosystems Laboratory Equipment displays 'List of user names is full'?
To resolve the 'List of user names is full' error on your Applied Biosystems Laboratory Equipment, delete unused user names.
What to do if Applied Biosystems GeneAmp PCR System 9700 Laboratory Equipment displays 'Enter oligo sequence'?
To resolve the 'Enter oligo sequence' error on your Applied Biosystems Laboratory Equipment, enter a value in the P1P2 fields of the TmCalc.
What to do if Applied Biosystems Laboratory Equipment printer is not responding?
To address the 'Printer not responding' issue on your Applied Biosystems Laboratory Equipment, check the printer connections and power switch.
General| Temperature Range | 4°C to 99.9°C |
|---|---|
| Temperature Accuracy | ±0.25°C |
| Temperature Uniformity | ±0.5°C |
| Block Format | 96-well |
| Temperature Uniformity at 60°C | ±0.5°C |
| Display | LCD |
| Power Requirements | 100-240V, 50/60Hz |
| Sample Capacity | 96 samples |
| Sample Volume Range | 10-100 µL |
Procedures for powering on, configuring settings, and customizing instrument parameters.
Guide to choosing, viewing, searching, and sorting PCR methods.
Steps to start, monitor, and pause a PCR run using the instrument.
Procedures for stopping, aborting, reviewing history, and handling run completion.
Guide to creating new methods and modifying cycling parameters like holds, cycles, and pauses.
Steps for naming, storing, printing, editing, and deleting created methods.
Step-by-step instructions for safely replacing the instrument's external fuses.
A table of error messages, their causes, and recommended actions.
A table listing common problems, their causes, and suggested remedies.
To Next Page
