67
CHANGING THE REAR LIGHT BULBS
(Fig. 68)
Proceed as follows:
◆ Unscrew the two screws (1);
◆ Remove the glass (2);
◆ Press the bulb (3) slightly and rotate it anticlock-
wise;
◆ Remove the bulb from its seat.
The introduction of a new bulb can be
carried out in one sense only, since the
two guide pins are misaligned.
◆ Install a new bulb correctly, then repeat the above
operations in the reverse order for the reassem-
bly.
Fig. 68
To Next Page