72
LUBRICANT CHART
Gearbox oil (recommended): F.C., SAE 75W - 90 or GEAR SYNTH, SAE 75W - 90.
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or superior to
the A.P.I. GL-4 specifications.
Mixer oil (recommended): GREEN HIT 2 or CITY 2T.
As an alternative to the recommended oil, use high-quality oils with characteristics in compliance with or superior to the ISO-L-
ETC++, A.P.I. TC++ specifications.
Fork oil (recommended): F.A. 5W or F.A. 20W as an alternative FORK 5W or FORK 20W.
If you need an oil with intermediate characteristics in comparison with the F.A. 5W and F.A. 20W or FORK
5W and FORK 20W, these can be mixed as indicated below:
SAE 10W = F. A. 5W 67% of the volume + F.A. 20W 33% of the volume, or
FORK 5W 67% of the volume + FORK 20W 33% of the volume, or.
SAE 15W = F. A. 5W 33% of the volume + F.A. 20W 67% of the volume, or
FORK 5W 33% of the volume + FORK 20W 67% of the volume.
Bearings and other lubrication points (recommended): AUTOGREASE MP - GREASE 30.
As an alternative to the recommended product, use high-quality grease for rolling bearings, working temperature range -30°C....
+140°C, dripping point 150°C... 230°C, high protection against corrosion, good resistance to water and oxidation.
Protection of the battery poles: neutral grease or vaseline.
Spray grease for chains (recommended): CHAIN SPRAY or CHAIN LUBE.
Use new brake fluid only. Do not mix different makes or types of oil without having checked bases compatibility..
Brake fluid: F.F. DOT 4 (brake system is also compatible DOT 5) - BRAKE 5.1 DOT 4 (brake system is also
compatible DOT 5).
Use only nitrite-free anti-freeze and corrosion inhibitors with a freezing point of -35°C as a minimum.
Engine coolant (recommended): ECOBLU -40 °C - COOL.
WARNING
WARNING
To Next Page