13
3.3 Intended use
The pneumatic seeders of types PS 120 to PS 500 serve to spread seed with differ-
ent properties and grain sizes on open fields.
The implements are designed solely for normal use in agricultural operations. Only
cereal varieties that are intended by the manufacturer and listed in the operating man-
ual may be used. Different seeding shafts are designed for the different cereal varie-
ties, which must be used and replaced if necessary. A special version of the seed drill
protected against corrosion can also be used for spreading fertiliser with a seeding
shaft designed for this purpose (intended use).
Any other use is considered to be non-intended. The manufacturer is not liable for
any resulting damage, the operator alone bears the associated risk.
Intended use also includes compliance with the conditions for operation, mainte-
nance, and repairs prescribed by the manufacturer.
The applicable accident prevention regulations as well as the other general safety-re-
lated and occupational health regulations must also be observed.
The manufacturer is not liable for any damage resulting from unauthorised modifica-
tions and the use of components and auxiliary parts.
3.4 Personnel requirements
The implement may only be used, maintained and repaired by persons who have rel-
evant experience and were instructed on the risks. The safety instructions must also
be handed over to other users.
Qualification
Persons who will be handling the seed drill must fulfil the following requirements:
Personnel Activities Required qualification
Forwarder
•
Transport of the seed drill
from one business to an-
other
Experience with transport
of machinery
•
Qualification of a transport
specialist for machinery
Transporter
•
Transport of the implement
within the farm
Forklift driver
•
Experience with handling
the suitable lifting gear
Installer
•
Installation and commis-
sioning of the seed drill
•
Trained mechanic
Setter
•
Setting up the seed drill
Experience in the agricul-
tural field
•
Experience with handling
the seed drill
To Next Page
Loading...
Need help?
General
