4
This section contains information on your seed drill and about this operating manual.
1.1 About this operating manual
Validity and purpose
This operation manual is valid for seed drills manufactured by APV with the type des-
ignations PS 120 M1 – PS 500 M2.
This operating manual provides anyone who will be handling the seed drill with the re-
quired information to be able to perform the following tasks properly and safely:
• Installation
• Start-up
• Operation
• Maintenance
• Repairs
• Decommissioning, dismantling, recommissioning, storage and disposal
Target group
This operating manual is aimed at all those who will be handling the seed drill:
• Transporter
• Assembly personnel
• Operating personnel
• Maintenance and repair personnel
Parts of the document that must absolutely be read
To prevent injuries and damage to the implement, it is absolutely necessary to have
read and understood the Basic safety instructions On page 11 section before han-
dling the implement.
Copyright
The copyright for this operating manual remains with the manufacturer:
APV - Technische Produkte GmbH
HEADQUARTERS
Dallein 15
A-3753 Hötzelsdorf
AUSTRIA
This operating manual contains regulations and technical drawings that may not, as a
whole or in part, be reproduced, distributed or used in any unauthorised way for com-
petitive purposes or passed on to others.
Passing on or reproduction of this operating manual, evaluation and communication
of its contents are not authorised unless explicitly agreed. Contraventions shall result
in an obligation to provide compensation for damages.
1 General information
To Next Page
Loading...
Need help?
General
