37
Overview
No. Designation
1 Seed tank cover
2 Seed tank
Procedure
This is how to fill the seed tank:
Step Description Explanation
1 To open the seed tank, turn the cover
(1) counterclockwise.
2 Fill the seed into the seed tank (2).
3 To close the seed tank, turn the cover
(1) clockwise.
5.9 Deactivating the agitator
Purpose
Use of the agitator is only required for seed types that tend towards bridging or for
very light seed (e.g. for grasses).
Requirements
The following requirements must be fulfilled for this work step:
• The implement is disconnected from the power source, see Disconnecting the
seed drill from the power source On page 40.
To Next Page
Loading...
Need help?
General
