44
In this section, you will find a selection of possible accessories for your implement.
9.1 HG 300 M1
The HG 300 M1 is a hydraulically driven radial
fan for working widths up to 12 m or for higher
spread rates for e.g. wheat.
It is very resistant to dust and foreign objects,
since these do not easily accumulate.
For mounting on the PS 120/200/300 M1 and PS
500 M2, a complete mounting kit including a tran-
sition piece and brace is available.
Scope of delivery:
1 HG 300 M1
1 Support
1 Flow regulator incl. hydraulic hoses
Order number:
Item no.: 08001-2-044
9.2 Fill level sensor
This sensor can be retrofitted on the
PS 120/200/300 M1.
Operation with a control box 1.2, 5.2 or 6.2 is re-
quired.
It measures how much seed is still left in the hop-
per, and triggers an alarm on the control box
when there is not enough seed in the hopper.
The intensity of the sensor can also be adjusted
for the respective seed type. It is adjusted using
the small slotted screw at the rear of the sensor.
Scope of delivery:
1 Fill level sensor
1 Assembly plate
Order number:
Item no. 04000-2-269
9 Accessories
To Next Page
Loading...
Need help?
General
