21
Required components, tools and materials
For this work step, the following components, tools and materials are required:
Suitable component for attachment (e.g. top link mounting kit, pallet fork or three-
point loader)
Bolts M 12, strength class 8.8 or higher
Self-locking fastenings (nuts)
• Lifting gear that is suitable for the mass of the respective implement version, see
Technical Data On page 10 for more information
Overview
No. Designation
1 Top link mounting kit
2 Seed drill
Procedure
To attach the seed drill to a tractor using the top link mounting kit:
Step Description
1 Fasten the top link mounting kit (1) with bolts and nuts onto the seed drill
(2).
2 Fasten the top link (1) with the bolts onto the tractor.
3 Using lifting gear, move the seed drill (2) close to the tractor and mount the
top link in the top link bracket. Using the counter plate, clamp the seeder
onto the tractor linkage drawbar.
4.3 Installing the dispersion plates on the soil tillage
implement
Purpose
The dispersion plates serve to fix the hoses, through which the spreading material
flows, at the right spot and spread the seed.
To Next Page
Loading...
Need help?
General
