AquaLab 4 Series User Manual

5 MENUS AquaLab
case, upper case and accents.
Note: User setup is not required for instrument operation. It is in
place for users wanting to be compliant with 21 CFR Part 11 or who
want to maintain the settings they have selected.
Auto Save
AquaLab Series 4 models have the ability to store water activity
readings within the instrument. By selecting Auto Save On, the
instrument automatically stores every water activity reading in the
internal memory. AquaLab Series 4 can store up to 8,000 records
before the memory is full. If you turn Auto Save Off then the in-
strument does not automatically store data, although you may store
any individual reading manually right after completing the test and
before beginning the next test.
To manually store a water activity or append an annotation to the
active reading that has been autosaved, press the save icon button
after the water activity measurement is completed. Pressing the icon
opens a Name screen. You may give this reading a name by pressing
the arrow buttons to highlight the letter and then pressing the Check
icon button. Press the save icon to save this data record with the
name you have specified.
Note: Pressing the Save icon button without giving it a name saves
the reading without name. If the save icon is not pressed after a
26

AquaLab 4 Series Specifications

General

Brand	AquaLab
Model	4 Series
Category	Measuring Instruments
Language	English