Aqualisa dream - Installation - Bath Fill; Bath Waste Assembly Steps

29
INSTALL ATION - BATH FILL
1
Carefully unscrew and remove the
overflow filler outlet from the body
assembly and set aside.
2
Carefully unscrew and remove the bath
waste clicker assembly from the waste
body and set aside.
2
1
2
1
3
Oer the bath waste into position ensuring the rubber washer is
correctly aligned between the waste assembly and the bath base.
4
Ensuring the rubber washer is correctly
aligned, pass the bath waste clicker
through the bath and secure to the waste
body assembly.
2
1
2
1