EasyManuals Logo
Home>Arcam>Amplifier>AVR400

Arcam AVR400 Handbook

Arcam AVR400
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
E-3
English
FCC INFORMATION FOR US CUSTOMERS
1. PRODUCT
is product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) is device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
2. IMPORTANT NOTICE:
DO NOT MODIFY THIS PRODUCT
is product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modication not expressly approved
by ARCAM may void your authority, granted by the
FCC, to use the product.
3. NOTE
is product has been tested and found to comply
with the limits for a Class B digital device, persuant
to Part 15 of the FCC Rules. ese limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
is product generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this product does cause
harmful interference to radio or television reception,
which can be determined by turning the product
OFF and ON, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the product into an outlet on a circuit
dierent from that to which the receiver is
connected.
Consult the local retailer authorized
to distribute this type of product or an
experienced radio/TV technician for help.
SAFETY INFORMATION
FOR EUROPEAN CUSTOMERS
Avoid high temperatures. Allow for sucient
heat dispersion when installed in a rack.
Handle the power cord carefully. Hold the plug
when unplugging the cord.
Keep the unit free from moisture, water, and
dust.
Unplug the power cord when not using the unit
for long periods of time.
Do not obstruct the ventilation holes.
Do not let foreign objects into the unit.
Do not let insecticides, benzene, and thinner
come in contact with the unit.
Never disassemble or modify the unit in any way.
Ventilation should not be impeded by covering
the ventilation openings with items, such as
newspapers, tablecloths or curtains.
Naked ame sources such as lighted candles
should not be placed on the unit.
Observe and follow local regulations regarding
battery disposal.
Do not expose the unit to dripping or splashing
uids.
Do not place objects lled with liquids, such as
vases, on the unit.
Do not handle the mains cord with wet hands.
When the switch is in the OFF position, the
equipment is not completely switched o from
MAINS.
e equipment shall be installed near the
power supply so that the power supply is easily
accessible.
A NOTE ABOUT RECYCLING:
is products packaging materials are recyclable and can be reused. Please dispose of any materials in accordance
with the local recycling regulations.When discarding the unit, comply with local rules or regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations
concerning battery disposal.
is product and the supplied accessories, excluding the batteries, constitute the applicable product according to
the WEEE directive.
CORRECT DISPOSAL OF THIS PRODUCT
ese markings indicate that this product should not be
disposed with other household waste throughout the EU.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal and to conserve
material resources, this product should be recycled
responsibly.
To dispose of your product, please use your local return and collection systems or contact the retailer where the
product was purchased.

Other manuals for Arcam AVR400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Arcam AVR400 and is the answer not in the manual?

Arcam AVR400 Specifications

General IconGeneral
Output level6000 mV
Receiver type-
Frequency range20 - 20000 Hz
Output impedance50 Ω
Input sensitivity4000 mV
Pre-out connectivityYes
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.02 %
Power output per channel (20-20KHz@8 Ohm)- W
HDMI in5
Composite video in4
Digital audio optical in2
Ethernet LAN (RJ-45) ports1
Multichannel audio input typeRCA
Component video (YPbPr/YCbCr) in3
Headphone connectivity3.5 mm
Connectivity technologyWired
Speakers connectivity typeBinding post
Audio formats supportedAAC, FLAC, MP3, WMA
Wi-FiNo
Supported radio bandsAM, DAB, FM
HDMI version1.4a
Product colorSilver
Audio decodersDolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic, Dolby Pro Logic IIx, Dolby TrueHD, DTS, DTS 96/24, DTS Neo:6, DTS-ES, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD Master Audio
Volume controlRotary
Power consumption (standby)0.5 W
Power consumption (typical)100 W
CertificationFCC, CE
Package weight20000 g
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth425 mm
Width435 mm
Height172 mm
Weight15500 g

Related product manuals