EasyManuals Logo
Home>Arcam>Amplifier>AVR400

Arcam AVR400 Handbook

Arcam AVR400
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
E-6
e AVR400 receiver is designed to produce a level of
performance that will truly bring music and movies
to life.
e AVR400 is a high-quality and high-performance
home-cinema processor and amplier built to Arcams
quality design and manufacturing standards. It
combines digital processing with high-performance
audio and video components to bring you an unrivalled
home-entertainment centre.
e AVR400 allows switching and control of seven
analogue and six digital audio sources in addition to
internal AM, FM and DAB radio – as well as networked
and USB audio sources – making it an ideal hub for both
home-cinema and two-channel stereo systems.
Since many of these source components are also capable
of generating video signals, the AVR400 includes
broadcast-quality switching for HDMI, Composite,
S-Video, RGB and Component video signals. BD-Audio
and SACD can be connected via the multi-channel
input. Control of the AVR400 is either by front panel
control buttons, IR remote control or RS232 port.
e CR102 remote control supplied with the AVR400
is an eight-device ‘universal’ learning remote control
which is simple to use, and once set up is able to control
a complete system. It can be programmed using its vast
internal code library to control CD and BD players,
PVRs, TVs and other devices.
e installation of the AVR400 in a listening room
is an important process which requires care at every
stage. For this reason, the installation information is
very comprehensive and should be followed carefully to
achieve an unrivalled level of performance.
before you
begin
4

Other manuals for Arcam AVR400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Arcam AVR400 and is the answer not in the manual?

Arcam AVR400 Specifications

General IconGeneral
Output level6000 mV
Receiver type-
Frequency range20 - 20000 Hz
Output impedance50 Ω
Input sensitivity4000 mV
Pre-out connectivityYes
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.02 %
Power output per channel (20-20KHz@8 Ohm)- W
HDMI in5
Composite video in4
Digital audio optical in2
Ethernet LAN (RJ-45) ports1
Multichannel audio input typeRCA
Component video (YPbPr/YCbCr) in3
Headphone connectivity3.5 mm
Connectivity technologyWired
Speakers connectivity typeBinding post
Audio formats supportedAAC, FLAC, MP3, WMA
Wi-FiNo
Supported radio bandsAM, DAB, FM
HDMI version1.4a
Product colorSilver
Audio decodersDolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic, Dolby Pro Logic IIx, Dolby TrueHD, DTS, DTS 96/24, DTS Neo:6, DTS-ES, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD Master Audio
Volume controlRotary
Power consumption (standby)0.5 W
Power consumption (typical)100 W
CertificationFCC, CE
Package weight20000 g
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth425 mm
Width435 mm
Height172 mm
Weight15500 g

Related product manuals