To Next PageTo Next PageWhat to do if the front panel display is blank on my Arcam AVR550 Amplifier?
If the front panel display of your Arcam Amplifier is blank, make sure the display hasn’t been turned off. Press the DISPLAY button on the front panel or remote control.
Why is there hum on the analogue input of my Arcam AVR550?
To address hum on the analogue input of your Arcam Amplifier: * Ensure all cables are making a good connection by withdrawing and re-plugging them fully (after turning the power off). * Check for broken or badly soldered connections inside the source cable connector. * If the hum occurs only with a specific source, ensure that the aerial cable or dish connection to this source is ground isolated.
General| Receiver type | Surround |
|---|---|
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 7 |
| Ethernet LAN (RJ-45) ports | 1 |
| Number of HDMI outputs | 3 |
| AirPlay | No |
| Audio decoders | DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD Master Audio |
| Audio Return Channel (ARC) | Yes |
| Apple docking compatibility | Not supported |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 1500 W |
| Supported radio bands | DAB, DAB+, FM |
| Internet radio services supported | Spotify |
| 12V trigger ports quantity | 2 |
| Speakers connectivity type | - |
| Package weight | 18800 g |
Weight and Dimensions| Depth | 425 mm |
|---|---|
| Width | 433 mm |
| Height | 171 mm |
| Weight | 15500 g |
Read, keep, heed, and follow all safety warnings and instructions for safe operation.
Follow installation guidelines to prevent hazards like electric shock, fire, and overheating.
Details on FCC compliance, product modification, and interference guidelines.
Safety advice for European customers regarding temperature, handling, and environment.
Guidelines for responsible recycling and disposal of the product and batteries.
Congratulations on purchasing the Arcam FMJ Receiver and an introduction to its features.
Details the high-quality design, performance, and connectivity of the Arcam Receivers.
Guidance on proper placement of the unit for optimal performance and ventilation.
Instructions for connecting the power cord and switching the unit on/off.
Advice on selecting and routing high-quality screened cables for optimal audio signals.
Measures to take if the Receiver causes radio or television interference.
Lists trademarks and licenses for audio technologies like Dolby, DTS, and HDMI.
Identifies HDMI, coaxial, and optical digital audio input/output ports.
Details analogue audio inputs, Zone 2 outputs, and preamplifier outputs.
Explains speaker outputs, power inlet, voltage select, and aerial/communication ports.
Connects source HDMI video outputs to receiver inputs and receiver output to display.
Tips for connecting equipment, managing cables, and input naming.
Connects digital audio sources and analogue audio inputs from source equipment.
Details Zone 2 output and front panel AUX/PHONES sockets for audio connections.
Shows how to connect audio/video from typical BD/DVD players using HDMI or digital/analogue.
Guides satellite receiver connection, noting potential digital audio requirements.
Illustrates connecting digital and analogue audio outputs from a CD player.
Explains aerial needs for FM/DAB reception based on signal strength and location.
Details RS232, Ethernet, and USB ports for control and file playback.
Explains trigger outputs for device control and IR inputs for remote operation.
Provides a 6V DC power connection for specific Arcam products.
Advises on optimal placement for subwoofer, centre, height, front, and surround speakers.
Explains the function of each speaker type in a surround sound system.
Instructions for connecting speaker wires to terminals, ensuring correct polarity.
Guides for bi-amping front speakers and connecting active subwoofers.
Connects preamplifier outputs to external power amplifiers for enhanced sound.
Instructions for switching the unit on, off, and into standby mode.
Explains the front panel display and how to select audio/video sources.
Details volume control, headphone usage, and the Stereo Direct mode.
Explains how to use Zone 2 for independent audio/video routing and control.
Accessing advanced settings like factory defaults, remote codes, and backups.
Instructions for updating the receiver's firmware using a USB flash drive.
Describes the function of each button on the front panel for operation.
Explains Power/Standby LED, Phones socket, Aux input, and Power switch.
Details the operation of the volume knob and mute button.
Location and requirements for the front panel remote control receiver.
Introduces the multi-device remote, its capabilities, and code library.
Provides tips for effective remote control use, including range and lighting.
Instructions for inserting batteries and important notes on battery usage.
Explains backlight, LED blinks, timeouts, low voltage indicator, and FCC compliance.
How device modes select sources and change remote behavior for different devices.
Details navigation keys, volume punch-through, and remote customisation.
Describes commands for AMP mode, USB file navigation, and network client control.
Explains functions for controlling Blu-ray/DVD players, TVs, and VCRs.
Details remote functions for Set-Top Boxes, Satellite receivers, and PVRs.
Explains remote functions for controlling Arcam CD players.
Guides setting speaker types (Large/Small) and measuring distances for accurate sound.
Procedures for setting speaker levels using test tones and an SPL meter.
Setting crossover frequencies and assigning unused channels for height or Zone 2.
Using the Dirac Live application and microphone for automatic speaker and room calibration.
Tips for optimizing auto setup and addressing potential problems.
Guidance on subwoofer setup and downloading the Dirac Live application.
How to enter and navigate the receiver's setup menus using the remote or front panel.
Explains the layout of the setup menu, including panels and scroll bars.
Setting up input names, assigning video sources, and managing input settings.
Adjusting lip sync delay and bass/treble for specific inputs.
Configuring Dolby Volume and Leveller functions for improved audio experience.
Options for stereo playback, bass redirection, and subwoofer level adjustment.
Selecting audio input types (HDMI, Digital, Analogue) and CD Direct mode.
Covers general system settings, source input info, and incoming audio format.
Details on sample rate, bit rate, dialnorm, video input, and resolution for audio inputs.
Configuring audio compression and sound stage balance for inputs.
Settings for Dolby Centre Spread, digital output frequency, and volume limits.
Configuring CEC, ARC, RS232 control, and menu language.
Advanced settings for speaker types, distances, and levels, including Dirac integration.
Fine-tuning speaker levels and assigning video sources to audio inputs.
Controlling HDMI output resolution and selecting decoding modes for sources.
Setting up Zone 2 functionality and configuring network client parameters.
Overview of the receiver's decoding capabilities for digital and analogue signals.
Explains modes for processing stereo and multi-channel audio sources.
How the receiver stores decoding settings per source type.
Explains how Dolby Volume adjusts loudness and dynamic range for consistent listening.
Guidance on configuring ceiling or Dolby Atmos enabled speakers for immersive sound.
Instructions for tuning FM radio and scanning for DAB digital radio stations.
How to access internet radio and save/select presets.
Steps for saving and deleting radio presets.
How to select and navigate internet radio and stored music files.
Details USB playback, setting up internet radio favourites via vTuner.
Instructions for using Spotify Connect with the receiver.
Connecting audio outputs and using spare speaker channels for Zone 2.
Setting up IR receivers and triggers for remote control of Zone 2.
Explains direct code setup, library search, and learning functions from original remotes.
Important notes on learning, timeouts, and deleting learned functions.
How to lock/unlock device modes and customise volume control buttons.
Accessing hidden commands and resetting the remote to factory defaults.
Information on where to find device code tables for setup.
Solutions for no power, blank display, and erratic remote control response.
Troubleshooting tips for no picture, poor picture quality, and no or distorted sound.
Resolving issues with sound from specific speakers or selecting Dolby/DTS modes.
Addressing hum, radio interference, and random source switching issues.
Solutions for high volume, USB/network connection problems, and poor internet radio quality.
Detailed technical specifications for the AV860 model, including power, inputs, and outputs.
Detailed technical specifications for the AVR850 model, including power, inputs, and outputs.
Detailed technical specifications for the AVR550 model, including power, inputs, and outputs.
Detailed technical specifications for the AVR390 model, including power, inputs, and outputs.
Detailed technical specifications for the SR250 model, including power, inputs, and outputs.
Details the two-year free repair warranty and terms for authorised dealers.
Procedures for making claims, packing, and shipping the unit for service.
Information on contacting Arcam support and registering the product online.
