3-3
3
7. Remove the ratchets and account for the springs.
GR505D
GR506D
8. Slowly remove the reel. Account for the spring.
INSPECTING
NOTE: Whenever a part is worn excessively,
cracked, or damaged in any way, replacement is
necessary.
1. Inspect the spring retaining notch in the recoil
housing.
GR113D
2. Inspect the loop of the recoil spring for wear or
cracking.
GR114D
NOTE: Note the orientation of the recoil spring
for assembling purposes.
GR115D
3. Inspect the flat areas of the reel for wear.
GR116D
! WARNING
Exercise extreme caution when removing as the
spring may disengage and cause severe injury.
To Next Page