ARECONT VISION AV100 VIDEO SYSTEM USER MANUAL
46
Arecont Vision 425 E Colorado St, 7
th
Floor Glendale, CA 91205 Revised 12/20/2010
www.arecontvision.com
www.arecontvision.comwww.arecontvision.com
www.arecontvision.com
Firmware Loader
Firmware Loader Firmware Loader
Firmware Loader –
––
–
Upgrad
UpgradUpgrad
Upgrading
ing ing
ing Camera
CameraCamera
Camera
Firmware
Firmware Firmware
Firmware /
/ /
/ Hardware in the Field
Hardware in the FieldHardware in the Field
Hardware in the Field
All models of Arecont Vision cameras are field-upgradeable since firmware version 51821. Recent H.264
models support firmware upgrade directly through the on-camera webpage, as shown in the "Administration
Menu" section of Chapter III . However the webpage approach is not available on non-H.264 models, and it
can only upgrade one camera per time. The AV FirmwareLoader is a special utility for upgrading camera’s
firmware and/or hardware. It supports all camera models and can update multiple cameras by one click. In
case there is a camera that needs to be upgraded, you can contact your distributor to obtain the latest
firmware upgrade file and utility. Please don't forget to disable any recording software/NVR applications prior
to updating the firmware. Also it is strongly recommended to temporarily turn off Windows firewall and anti-
virus software during the upgrade since it is frequently seen that firewall and anti-virus software could
compromise the FirmwareLoader's ability to discover cameras without warning.
Figure 34. FirmwareLoader
To Next Page
Loading...
Need help?
General