16
E-119TRI+DISC 345A / 345B: ASSEMBLY GUIDE
6.3 Seat Post MIN and MAX insertion
• The value must be between A & B based on your bike size.
• Measured from the BB center to the top of the saddle*
• Based on a chariot and saddle of +/- 155 mm in height.
My desired saddle height
D =
in mm.
C - D =
If the value is negative, no cutting is neccessary.
Cutting Lenght in mm. (Max. 180 mm)
Seatpost Cutting Formula
Use the values based on your bike size in the sizing chart above.
The cut must be clean and perpenticular to the shaft.
Minimum Seatpost Insertion : 80mm
Maximum Seatpost Cut : 180 mm
A
B
Saddle Height Limits
Size
Max Saddle Height Min Saddle Height Formula Value
mm mm
A B C
X-Small 790 610 735
Small 836 656 731
Medium 851 671 731
Large 877 697 757
X-Large 908 728 788
To Next Page
Loading...
