38
E-119TRI+DISC 345A / 345B: ASSEMBLY GUIDE
12.4 frame routing – handlebar - Mechanical
1. Run the rear hydraulic brake housing through the desired side of the handlebar.
2. Run the front hydraulic brake housing through the desired side of
the handlebar.
Inverted
Normal
40cm
58mm
Stack Heigth
Handlebar
Orientation
0 - 70 Normal
60 - 90 Inverted
1. The handlebar is reversible: flipping
it will raise the hand position by
58mm from the basebar. Choose the
handlebar orientation depending of
your preference. (See the table below
for reference values).
2. The handlebar can be flipped after
assembly, but you will to disconnect
the hydraulic
brake housing.
To Next Page
Loading...
