Argon 18 KRYPTON PRO 302A - Default Chapter; Table of Contents

1. Tools Needed and First Aid Kit ..........................2
2. Frameset Inspection ...................................3
3. Troubleshooting / Tips / Specication ...................4
4. Bike Fitting ...........................................5
4.1. Sizing Chart .......................................6
4.2. Min/Max Seat Post Insertion ........................7
4.3. Stack Height Adjustment ...........................8
4.4. Stem Compression Cap and Over-Stack Spacer .......9
4.5. Cutting the Fork’s Steerer Tube ....................10
4.6. Headset Installation ...............................11
5. Rear Derailleur Hanger Adjustment ....................12
6. Cable and Housing Routing - Electronic Shifting .........13
7. Cable and Housing Routing - Mechanical Shifting .......17
8. Stem Assembly .......................................21
9. Seat Post Collar Assembly .............................28
10. Seat Post Assembly ..................................29
11. Chain Catcher .......................................30
12. Fender bracket .....................................31
13. Frameset Parts’ SKU and Description ..................32
Annex A. Stem Swap Kits ................................35
Annex B. Tips for Traveling with a Bike Box ................36
For the warranty to be valid, the bicycle must be fully assembled by an authorized Argon 18 dealer. High-end components,
particularly carbon parts, need extra care when assembled. These components must be installed using a torque wrench to
make sure every bolt is at the right torque setting to prevent damage.
My Krypton Pro
Date of purchase:
Retailler:
Size:
Serial Number:
KRYPTON PRO 302A Table of Contents
1