7
KRYPTON PRO 302A 4.2. Min/Max Seat Post Insertion
NOTE: THE ABOVE IMAGE IS FOR VISUAL REFERENCE OF SEATPOST INSERTION ONLY
Refer to the supplied table for details on Saddle Height and SeatPost insertion limits.
i. The correct frame size must be determined according to the saddle height limits.
A. Minimum Saddle Height
D. Maximum Saddle Height
ii. Depending on the size of the frame and the desired saddle height, the SeatPost might need to be cut.
B. Maximal insertion depth in the Frame’s SeatTube.
C. Required SeatPost cut length to be able to adjust the Saddle Height at the Minimum position.
- Adjust the SeatPost cut length in accordance with your desired Saddle Height.
Required minimum SeatPost Cut length = C - (“desired Saddle Height” - A)
- Example: - For a desired Saddle Height of 600mm on a XX-Small Krypton Pro Frame
- The required minimum SeatPost Cut length is: 90 - (600-560) = 50mm
E. Minimal insertion depth in the Frame’s SeatTube.
E
D
B
A
C
Saddle Height Limits Krypton Pro
Size
Saddle
H Min
ST Max
Insert
SP Cut
Saddle
H Max
SP Min
Insert
mm mm mm mm mm
A B C D E
XX-Small 560 170 90 740 80
X-Small 590 200 60 770 80
Small 625 235 25 805 80
Medium 660 260 0 840 80
Large 695 300 0 875 80
X-Large 730 315 0 910 80
To Next Page
Loading...
