Argon 18 KRYPTON PRO 302A - Page 35

34
KRYPTON PRO 302A 13. Frameset Parts’ SKU and Description
No. Name A18 SKU# Qty
7.1
Stem 70mm Krypton Pro (carbon body only)
Stem 80mm Krypton Pro (carbon body only)
Stem 90mm Krypton Pro (carbon body only)
Stem 100mm Krypton Pro (carbon body only)
Stem 110mm Krypton Pro (carbon body only)
Stem 120mm Krypton Pro (carbon body only)
81088
81089
81090
81091
81092
81093
1
7.2
Cables/hoses Hood for Stem 70-80mm
Cables/hoses Hood for Stem 90-100-110mm
Cables/hoses Hood for Stem 120mm
81073
81074
81075
1
7.3
1st Spacer (Stem base 70 to 80mm)
1st Spacer (Stem base 90 to 120mm)
81077
81078
1
7.4 Bar Clamp 81076 1
7.5 Compression Cap 81079 1
7.6 FLAT HEAD SOCKET SCREW M5x0.8P x 25mm 81080 1
7.7 Spacer 5mm 81081 2
7.8 Spacer 10mm 81082 2
7.9 Eccentric top spacer IST Stem 81083 1
7.10 Socket Head BOLT M5x20 LG W/ CONICAL HEAD, (inl. Capve washer) 81084 2
7.11 Socket Head BOLT M5x14 LG W/ CONICAL HEAD, (inl. Capve washer) 81085 4
8 REAR THRU AXLE WITH REMOVABLE HANDLE 80813 1
9 FRONT THRU AXLE 80812 1
10 FOAM LINER 80811 1