Argox OS-214 plus - Page 49

48
Label jam
Recover the jam
LED Indicators: Power and Ready LEDs blink alternately
Power LED
Ready LED
ON
OFF
OFF
ON
Possible Problems
Solutions
Remarks
Ribbon out
Supply the ribbon roll
Not applicable to
direct thermal
type.
Ribbon jam
Recover the jam
Ribbon sensor error
Replace ribbon sensor
LED Indicators: Only the Power LED blinks
Power LED
Ready LED
ON
ON
OFF
ON
Possible Problems
Solutions
Remarks
Serial IO error
Check the baud rate
Serial interface only
Memory full
Add the extension
RAM(flash memory
card)
Cutter failed, or jam
at cutter
Check the cutter
Recover the jam
Occurs only when
installing or setting the
cutter
Hardware error
Call for service