Ariens RAZOR 911607 - Page 14

EN - 12
Bagging Grass Clippings
1. Stop engine and wait for moving parts to
stop and for hot parts to cool.
2. Lift rear door and remove mulch plug.
See Figure 8.
3. Hold rear door open and install grass bag
onto bag mount. Release rear door. See
Figure 9.
Rear Discharging Grass Clippings
1. Stop engine and wait for moving parts to
stop and for hot parts to cool.
2. Remove grass bag. See Empty Grass
Bag on page 11.
3. Lift rear door and remove mulch plug.
See Figure 8.
4. Slowly return rear door to closed position.
Mulching Grass Clippings
1. Stop engine and wait for all moving parts
to stop and for hot parts to cool.
2. Lift rear door and install mulch plug. See
Figure 10.
IMPORTANT: Mulch plug locks into position.
Ensure that mulch plug is secure by gently
pulling bottom of plug handle. See Figure 11.
3. Slowly return rear door to closed position.
CAUTION: Bag wears from
normal use. Check bag frequently
for wear and replace if necessary.
CAUTION: There should be no
gaps between bagger and
mounting surface. If necessary,
clear debris from bag mounting
surface.
Figure 8
Figure 9
Figure 10
Figure 11
1
1. Mulch Plug Handle