Ariston ALTEAS ONE+ NET User Manual

OVERVIEW
/ 4
Advice for the installer
This appliance is designed to produce hot water for domestic
use.
It should be connected to a heating system and a distribution
network for domestic hot water, both of which must be
compatible with its performance and power levels.
The use of the appliance for purposes other than those
specied is strictly forbidden. The manufacturer cannot be held
responsible for any damage caused by improper, incorrect and
unreasonable use of the appliance or by the failure to comply
with the instructions given in this manual.
Installation, maintenance and all other interventions must
be carried out in full conformity with the governing legal
regulations and the instructions provided by the manufacturer.
Incorrect installation can harm persons, animals and
possessions; the manufacturing company shall not be held
responsible for any damage caused as a result. The boiler
is delivered in a carton. Once you have removed all the
packaging, make sure the appliance is intact and that no parts
are missing. If this is not the case, please contact your supplier.
Keep all packaging material (clips, plastic bags, polystyrene foam,
etc.) out of reach of children as it may present a potential hazard.
In the event of a fault and/or malfunction, turn the appliance
off, turn off the gas cock and do not attempt to repair it
yourself. Contact a qualied professional instead.
All repairs, which should only be performed using original
spare parts, should be carried out by a qualied professional.
Failure to comply with the above instructions could
compromise the safety of the appliance and invalidate all
liability on the part of the manufacturer.
In the event of any maintenance or other structural work in the
immediate vicinity of the ducts or ue gas exhaust devices and
their accessories, switch the appliance off by switching the to
the “OFF” position and shutting off the gas control valve. When
the work has been completed, ask a qualied technician to
check the efciency of the ducting and the devices.
Symbols used on the data plate
MIN
Q
MAX
P
60/80°C
1
2
5
4
3
3
6
7
19
8
9
10
11
12
14
15
16
17
18
13
20
21
22
1
Legend :
1. Brand
2. Manufacturer
3. Boiler model
Serial number
4. Commercial reference
5. Certication number
6. Destination country
Gas category
7. Gas setting
8. Installation type
9. Electrical data
10. Maximum domestic hot
water pressure
11. Maximum heating pressure
12. Boiler type
13. NOx class / Efciency
14. Input rating nominal
heating
15. Power ouput heating
16. DHW specic ow rate
17. Boiler output efciency
18. Input rating nominal DHW
19. Gases which may be used
20. Minimum ambient
temperature for use
21. Max. central heating
temperature
22. Max. domestic hot water
temperature
ATTENTION!!
THE INSTALLATION AND FIRST
IGNITION OF THE BOILER MUST BE
PERFORMED BY GAS SAFE REGISTERED
ENGINEER IN COMPLIANCE WITH
GAS SAFETY (INSTILLATION & USE)
REGULATIONS AND ALL OTHER NATIONAL
REGULATIONS REGARDING INSTALLATION,
AND IN CONFORMITY WITH ANY
REQUIREMENTS ESTABLISHED BY LOCAL
AUTHORITIES AND PUBLIC HEALTH
ORGANISATIONS.
AFTER THE BOILER HAS BEEN INSTALLED,
THE INSTALLER MUST ENSURE THAT THE
END USER RECEIVES THE DECLARATION
OF CONFORMITY AND THE OPERATING
MANUAL, AND SHOULD PROVIDE ALL
NECESSARY INFORMATION AS TO HOW
THE BOILER AND THE SAFETY DEVICES
SHOULD BE HANDLED.
Ensure the boiler is switched off before cleaning any exterior
parts of the appliance.
Clean using a cloth dampened with soapy water. Do not use
aggressive detergents, insecticides or toxic products. If the
appliance is used in full compliance with current legislation,
it will operate in a safe, environmentally-friendly and cost-
efcient manner.
If using kits or optional extras, make sure they are authentic.

Ariston ALTEAS ONE+ NET Specifications

General

Brand	Ariston
Model	ALTEAS ONE+ NET
Category	Boiler
Language	English