OVERVIEW
/ 5
Install the appliance on a solid wall which is not
subject to vibration.
Noisy operation.
When drilling holes in the wall for
installation purposes, take care not to damage
any electrical wiring or existing piping.
Electrocution caused by contact with live
wires. Explosions, res or asphyxiation caused
by gas leaking from damaged piping.
Damage to existing installations.
Flooding caused by water leaking from
damaged piping.
Perform all electrical connections using wires
which have a suitable section.
Fire caused by overheating due to electrical
current passing through undersized cables.
Protect all connection pipes and wires in
order to prevent them from being damaged.
Electrocution caused by contact with live
wires. Explosions, res or asphyxiation caused
by gas leaking from damaged piping.
Flooding caused by water leaking from
damaged piping.
Make sure the installation site and any systems
to which the appliance must be connected
comply with the applicable norms in force.
Electrocution caused by contact with live wires
which have been installed incorrectly.
Damage to the appliance caused by improper
operating conditions.
Use suitable manual tools and equipment
(make sure in particular that the tool is not
worn out and that its handle is xed properly);
use them correctly and make sure they do not
fall from a height. Replace them once you have
nished using them.
Personal injury from the falling splinters or
fragments, inhalation of dust, shocks, cuts,
pricks and abrasions.
Damage to the appliance or surrounding
objects caused by falling splinters, knocks
and incisions.
Use electrical equipment suitable for its
intended use (in particular, make sure
that the power supply cable and plug are
intact and that the parts featuring rotary or
reciprocating motions are fastened correctly);
use this equipment correctly; do not obstruct
passageways with the power supply cable,
make sure no equipment could fall from a
height. Disconnect it and replace it safely after
use.
Personal injury caused by falling splinters
or fragments, inhalation of dust, knocks,
cuts, puncture wounds, abrasions, noise and
vibration.
Damage to the appliance or surrounding
objects caused by falling splinters, knocks
and incisions.
Make sure any portable ladders are positioned
securely, that they are suitably strong and that
the steps are intact and not slippery and do not
wobble when someone climbs them. Ensure
someone provides supervision at all times.
Personal injury caused by falling from
a height or cuts (stepladders shutting
accidentally).
Make sure any rolling ladders are positioned
securely, that they are suitably strong, that the
steps are intact and not slippery and that the
ladders are tted with handrails on either side of
the ladder and parapets on the landing.
Personal injury caused by falling from a
height.
During all work carried out at a certain
height (generally with a difference in height of
more than two metres), make sure that parapets
are used to surround the work area or that
individual harnesses are used to prevent falls.
The space where any accidental fall may occur
should be free from dangerous obstacles, and
any impact upon falling should be cushioned by
semi-rigid or deformable surfaces.
Personal injury caused by falling from a
height.
Make sure the workplace has suitable
hygiene and sanitary conditions in terms
of lighting, ventilation and solidity of the
structures.
Personal injury caused by knocks, stumbling
etc.
Protect the appliance and all areas in the
vicinity of the work place using suitable
material.
SAFETY REGULATION
Key to symbols:
Failure to comply with this warning could
expose the user to the risk of serious or
fatal personal injury
Failure to comply with this warning risks
damage to property, plants or animals
To Next Page
Loading...
Need help?
General
