Ariston NIMBUS M NET User Manual

Description
8 / EN
2.3 Complete home page
30
21°
SALOTTO
,5
°C
5
18
,0
°
Ve 4-GIU 12:30
1,5 bar
10°
ABC
D I
L
E F G H

Fig. 3
A Menu button
B Selector
C Back button
D Function icons
E Weather and outdoor temperature
F Room temperature
G Required temperature
H Time & Date
I Operation icons
M Pressure indication
i
The SENSYS HD interface is compatible with
Ariston NET when used with an ARISTON Wi-Fi
module. Find out more on www.ariston.com/it/
ariston-net
SYMBOLS
Wi-Fi module update in progress
AP
Access Point Opening in progress
Wi-Fi Off or not connected
Wi-Fi connected but internet access failed
Wi-Fi active
Outside air temperature
Flame present
Optimum boiler efficiency
Solar heating module connected
Photovoltaic contact enabled
Photovoltaic contact active
SG
Smart Grid system enabled
Supplementary heating elements not enabled
Number of heating element stages active
Heat pump active
Room set-point extension active
CH
Heating active
SYMBOLS
Domestic hot water
Domestic hot water active
Cooling service enabled
Cooling service active
90%
Relative humidity index
Time Program
Manual
Temperature regulation function active
Holiday function active
Domestic hot water Boost function enabled
Hot water comfort enabled in electricity reduced
band rate
HC 40
Hot water comfort enabled in electricity reduced
band rate and domestic hot water set-point at 40°C
in electricity full band rate
Test mode active
Thermal sanitation function active
Anti-frost function active
Dehumidification function active
Silent mode active (only for heat pumps)
Error in progress

Ariston NIMBUS M NET Specifications

General

Type	Air-to-Water Heat Pump
Refrigerant	R32
Power Supply	Electric
Power Supply Voltage	230 V
Connectivity	Wi-Fi
Heating Capacity	6 kW