10
The stretcher can be tilted to facilitate
cleaning and disinfection.
1 Press the button, then move the
catch to one side and
2 Tilt the stretcher.
This operation is easier done with the
wheels of the trolley braked.
The mattress design combined with
the slope of the stretcher ensures pro-
per drainage.
If the shower is used over a floor
drain, the flexible drainage hose can
be connected to reduce splashing.
With your Concerto/Basic equip-
ment either drainage hose type 1
or drainage hose type 2 is included.
(See figure 1.)
Attaching the drainage hose
Instruction for drainage hose type 1.
(See figure 2.)
1 Insert the drainage hose through the
drainage hole of the shower mattress
and the stretcher.
2 On the underside of the stretcher,
screw the sleeve to the top end of the
hose.
Instruction for drainage hose type 2.
(See figure 3.)
1 Insert the coupling through the
drainage hole. On the underside of
the stretcher, screw the sleeve to the
coupling.
2 Insert the drainage hose coupling
and turn clockwise to lock it.
To remove the the drainage hose,
make the above described opera-
tions in reverse order.
Before transportation, put the
drainage hose nozzle into the holder.
(See figure 4.)
Tilting the stretcher (Concerto)
1 2
WARNING!
Make sure that the catch has loc-
ked (klick sound) the stretcher after
putting it back in place.
Drainage/Drainage hose
1
Type 1 Type 2
2
3
4
Reference Copy
Published
Check occasionally
for new editions.
To Next Page
Loading...
