Arkray GLUCOCARD Expression - Setting the Alarms

22
Setting the Alarms
You can set up to three alarms on the GLUCOCARD Expression meter.
You must set the clock before the alarms can be set. When an alarm
sounds, the meter turns on, and a melody sounds for 30 seconds.
Pressing Enter ( ) or inserting a test strip will silence the alarm. You can
set one, two, or all three alarms.
You will need:
Your GLUCOCARD Expression Meter
Step 1:
Press and hold Enter ( ) to turn on the meter.
Step 2:
Press Enter ( ) to enter setup screen.
Step 3:
Press < or > until starts to ash. If the voice function is on, the meter
will say, “Set Testing Alarm.” Press Enter ( ) to enter alarm setting.
screen advances to the minute setting.
<
<