25
Setting Volume
Step 1:
Press and hold Enter ( ) to turn on the meter.
Step 2:
Press Enter ( ) to go into setup screen.
Press < or > until starts to ash.
Press Enter ( ) to enter volume setting.
Step 3:
The screen displays the current sound volume (default is 2).
Press < or > to adjust the sound volume from 1 (lowest)
to 5 (highest). A melody will sound according to the
sound volume you have selected. Setting to 0 will turn
off the voice function. When the voice is turned off, the
meter will beep to alert you of important messages.
Once you have determined the suitable volume, press
Enter ( ) to exit volume setting.
<
<
PM
To Next Page
Loading...
