26
Language Selection
Step 1:
Press and hold Enter ( ) to turn on the meter.
Step 2:
Press Enter ( ) to enter setup screen.
Step 3:
Press < or > until starts to ash. If the voice function is on, the meter
will announce “Language Selection.”
Step 4:
Press Enter ( ) to enter the language set up. English
is the default language (1 on the display screen) and is
announced. Press < or > to select Spanish (2 on the display
screen). Press Enter ( ) when you have nished selecting
the language and exit language selection.
<
<
PM
To Next Page
Loading...
