65
1. Wash hands with soap and water.
2. Inspect for blood, debris, dust, or lint anywhere on the meter.
3. Clean or disinfect meter.
4. To clean the GLUCOCARD Expression meter, blood/body uids must
be thoroughly cleaned from surface and objects before disinfecting.
Dispense the towel (DISPATCH) from its package. Wipe surface with
towel (DISPATCH) until completely wet. You should wipe all external
areas of the meter including both front and back surfaces. Avoid
wetting the test strip holder. Allow to remain wet for one minute
at room temperature (68-77° F). Discard used towel in a sealed
container where it will not be touched by others.
To Next Page
Loading...
