Step 2: Press the Orange/Up Arrow and Gray/
Down Arrow buttons at the same time for 5
seconds. A beep sounds and the meter turns
on. Next, a second beep sounds and “SET”
shows on the screen.
14
Step 3: Use the Orange/Up Arrow to change the set-up screen. When
you press the Orange/Up Arrow, the set-up screen changes in the order
shown in the diagram to the right. Press the Gray/Down Arrow button to
change a setting within a set-up screen menu.
Note: If you need to go back to a setting, you must scroll through
each set-up option. You cannot go backwards in set-up mode.
In set-up mode, the meter will turn off automatically after 3 minutes
of non-use.
To Next Page
Loading...
