Arkray Glucocard X-Meter - When to Perform a Control Solution Test

24
Perform a Control Solution Test:
•BeforetestingwiththeGLUCOCARD™X-METERforthersttime.
•Whenyouopenanewbottleofteststrips.
•Wheneveryoususpectthemeterorteststripsmaynotbefunctioning
properly.
•Iftestresultsappeartobeabnormallyhighorloworarenotconsistent
with clinical symptoms.
•Theteststripbottlehasbeenleftopenorhasbeenexposedto 
temperatures below 34°F (1°C) or above 86°F (30°C), or humidity levels
above 80%.
•Tocheckyourtechnique.
•WhentheGLUCOCARD™X-METERhasbeendroppedorstoredbelow
32°F (0°C) or above 122°F (50°C).
Important:
•UseonlywithGLUCOCARD™X-METERandGLUCOCARD™X-SENSOR
Blood Glucose Test Strips.
•GLUCOCARD™X-METERCONTROLisnotintendedforhuman
consumption. Do not drink.