26
Step 1: Insert a test strip as shown in diagram. Test strip should seat firmly
into meter. The meter will turn on automatically. The full screen will come
on for a moment. Make sure all symbols appear on the screen (see
page 8). Then the code number (F-2, F-3, or F-4) will appear and will
alternate with the Apply Blood symbol. Make sure that the code
number on the screen matches the code number on the test strip
bottle. If screen code does not match the test strip code, use a new test
strip. If code still does not match, use a new bottle of test strips or call
Customer Service at 800.566.8558 (24 hours a day, 7 days a week, USA
and Canada only).
To Next Page
Loading...
