39
Step 2: The beep will sound again. The Apply Blood symbol and the
code number (F-2, F-3, or F-4) will alternate on the screen. Verify that
the code number on the screen matches the code number printed on
the bottle. If the code number does not match, the meter may give a
false reading. If code does not match, use a new strip. If code still does
not match, use a new bottle of test strips or call Customer Service at
800.566.8558 (24 hours a day, 7 days a week, USA and Canada only).
Verify that the date and time appear on the screen and are correct. If
date and time are not correct, reset them (see Meter Set-up, page 13).
To Next Page
Loading...
Need help?
General
