43
Step 2: When you have selected the desired
marker, remove the test strip. When you recall
the result from memory, the selected marker
will be displayed (“DEL”, “CONT” or no marker).
NOTE: Results collected in Control Mode automatically show “CONT”
when the result is first displayed and when it is reviewed in Memory.
NOTE: The following are NOT
included in the 14-day or 30-day
test averages:
•ResultscollectedinControl
Solution mode (and therefore
marked “CONT”).
•Resultsmarked“CONT”or“DEL”
by you.
•Resultsobtainedwhendateand
time have not been set.
To Next Page
Loading...
Need help?
General
