67
Test strip problem. Contact bars on test strip may be
dirty. Incorrect test strip used. Used test strip has been
inserted. Repeat test with new test strip.
Not enough blood added to test strip. Or incorrect
blood application technique. Retest with new test strip.
Code Number. This shows the code number currently in
the meter. The number on the screen must match the
number on the test strip bottle. If screen code does not
match the test strip code, use a new test strip. If code
still does not match, use a new bottle of test strips or call
Customer Service at 800.566.8558.
Apply Blood Sample. The Apply Blood symbol flashes
alternately with strip code number (F-2, F-3, or F-4).
This shows that the meter is ready for the blood sample.
To Next Page
Loading...
Need help?
General
